Ghost 2 Immobiliser Problems
Created to guard vehicles from key cloning and hacking The Ghost 2 immobiliser is a discrete device that is able to be fitted without causing damage to your car. It stops you from starting your car unless you enter the correct sequence of buttons in your vehicle. This is similar to a mobile password.
Stop/Start
Ghost immobilisers stop vehicles from being stolen by stopping the engine from starting until it is issued the correct PIN code. This is done without modifying the vehicle, and is not detected by thieves. The unit communicates with the ECU via the CAN data bus to immobilise the vehicle. This system is very similar to the one that automobile manufacturers have used in their vehicles for a long time However, thieves isn't able to add a key or utilize key relay technology to bypass it like they can with factory fitted systems.
A Ghost can be fitted to any van, car, motorhome, caravan or bike with an engine and is compatible with all major brands of vehicles. The same system is compatible with electric vehicles. It's a great alternative to wheel clamps and steering wheel locks.
If the Ghost is activated it will block all buttons in your car and prevent the ignition from starting without a PIN code. This can be done via the Android or Apple mobile app or by entering the code using your key fob. If the incorrect code is entered the app will show an indicator light. The Ghost will then refuse to let the vehicle to be restarted. This is a great deterrent, and if the vehicle can't be initiated, the criminal will then move on to a different area of.
The Ghost is a small weatherproof device that is able to be concealed in the most difficult to reach parts of your car. It is extremely easy to install with an average of 20-30 minutes for each vehicle. It is also easy to remove should you choose to move your vehicle around or return it for service or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, which is recognized by a few insurance companies. It also has a secure emergency Pin Code Override, and a Service/Valet mode that can be activated by pressing a button within the app, or by using your key fob.
Disarm
Ghost immobilisers, unlike mechanical anti-theft devices that can be removed, are hidden inside the vehicle. They are nearly impossible to hack or bypass and, even if they are found, a thief will not be able to start the engine. A ghost immobiliser is able to prevent key cloning, as well as devices spoofing signals and signal jamming. These are the methods thieves employ to gain access into cars with standard immobilisers.
The immobiliser sends a message to the ECU. If a wrong code is received, the vehicle will not start because the engine will not start. It is possible to disable a ghost immobiliser by using a software tool, but it's extremely difficult and time-consuming to do so. The software must be installed and operated by a authorized installer.
The Ghost immobiliser is a tiny device that is tucked away in the wiring loom of your vehicle and is invisible to the naked eye once installed. It will not show up on diagnostic systems, there are no LED indicators, and it does not communicate with the engine through the OBD port. It communicates without sound via the CAN data circuit.
The system will block the vehicle from starting unless it is able to receive a user-defined PIN code sequence. This can be entered using buttons on the steering wheel and door panels as well as the central console. This is a safer way to safeguard your car as it does not require the use of keys or remote control.
Ghost also comes with a service mode that can be turned on via the mobile application. This lets you hand over your keys to someone else to use for valet parking or service, without needing to enter an arm-disarm sequence.
You should never remove the system from your Ghost by yourself, regardless of whether it's in service mode. This could cause damage to the engine. It is recommended to speak with a TASSA-verified installer who can safely and correctly remove the system. cost of ghost immobiliser come with the QR fingerprint stickers that is hidden in various locations of your vehicle. they are linked to our international security register. In the event the system is removed and then sold on the black market this will link it back to the original owner.
Anti-Hijack
The anti-hijack feature is a key feature of the Ghost Immobiliser 2. This is a sophisticated key that shields your vehicle from thieves. If the ignition switch is turned to on, and the vehicle remains stationary for a period of 30 seconds and the Ghost system will automatically stall the engine and turn on the hazards lights on. This gives the driver or passengers time to press a security button (depending on the vehicle) before the system is activated and the engine is once again allowed to begin.
Contrary to many other systems that simply stall the engine whenever the ignition switch is turned on The Ghost system has a unique controller and timer unit that will close the valve for cutting off fuel 14 if it is activated after the set time even in the event that the ignition is switched on! The delay time interval needs to be long enough to allow the hijacked owner of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the stalled vehicle before the system can be activated.
The Ghost offers an additional layer of security that blocks common hacking methods used to gain entry into modern cars like relay attacks and key range expanding. This is due to the fact that the Ghost system communicates in a quiet manner and doesn't emit any signals that could be detected by a criminal using code grabbing or RF scanning technology.
The Ghost system also has the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of an PIN code. This is a great option if you park your car and only require it to be left for a short time in order to open the garage door or put groceries in the boot. The system will end service mode based on speed and time or by using the easy PIN code input process and give you assurance that only YOU can use your vehicle!
Keyless Entry
Many customers are seeking additional security measures due to the increasing trend of thefts from cars using contactless. This is particularly true for those who have invested time or money in personalizing their vehicle and own rare/expensive vehicles. A supplementary immobiliser is an affordable method to stop this type of theft as it can prevent your vehicle from starting until the right pin code is entered alongside your key fob.
Immobilisers are designed to be used on various vehicle circuits, including those which control starter motors and fuel pumps. They can also turn off the alarm for cars in order to draw attention and deter potential thieves.
These devices communicate directly with the engine control unit via the CAN data network and hinder thieves from gaining access to it by installing a new ECU or using key programmers. The immobilisers can be installed discretely inside your vehicle, leaving no trace and are totally inaccessible to the tools high-tech thieves employ.
The Ghost immobiliser is different from other systems that require drivers to carry an app or tag. Instead, you are able to select your own pin sequence by pressing an image on your steering, door panel, and centre console. The pin can easily be changed and makes the device as secure as a bank card. It's also more difficult to break because it takes up to 20 press.
Ghost also has a Valet/Service mode that allows users to deactivate it when you are going to surrender your vehicle for valet parking or service. This allows the system to operate within parameters such as a 30 mph speed limit. It is then reactivated using the original key or the corresponding entry code.
Installed by our accredited installers and certified installers, it is the most secure and efficient aftermarket CAN-immobiliser available. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card with your unique QR code, as well as an emergency code that is secure that you keep in the wallet/purse of your vehicle.